Product Description

PRODUCT APPLICATION

Our products  are used for EV MOTOR of new energy vehicles.

PRODUCT ADVANTAGES

A>The manufacturing accuracy based on P5 Level.

B>Super pure steel is used,after forging,annealing,cold rolling and then turing, in order to obtain better organiazational compactness. The harmful non-matallic inclusings are greatly reduced in our special made super clean steel

C>Diameter variation of self-researched steel ball and ceramic ball can reach 0.13um,Sa<30nm. The ceramic ball is adopted to greatly reduce the abrasion of the surface starting poin and  noise, prolong lubrication life.

 

D>Composite cage suitable for high-speed operation to prevent the occurrence of abnormal wear and tear off cause by umbrella effect.

 

E>All kinds of reliability tests can be carried out, based on tribology  about life analysis, can be used as a reference for machinning accuracy of support ring,steel ball and cage.

F>Clean cleaning, filtering accuracy of 0.1um, to avoid the noise caused by garbage crushing.
     a.shake cleaning—de-fat,remove most of the putty
     b.Dur-ultrasonic jet cleaning—non-fat,ultrasonic cleaning
     c.corncob roll and throw—remove the burrs
     d.five-tank washing—RO water ultrasonic,remove water-soluble garbage
     e.five-tank hydrocarbon—ultrasonic,removoe oil-soluble garbage


PRODUCT INTRUDACTION

General information of deep groove ball bearing
Deep groove ball bearing consists of an outer ring, an inner ring, a group of steel balls and a group of cages.  Deep groove ball structure is also divided into seal and open structure. The open type means that the bearing has no sealing structure. The sealed deep groove ball is divided into dust-proof seal. The dust-proof seal cover is made of steel plate, which only serves as a simple way to prevent dust from entering the bearing raceway. 

Working principle of  deep groove ball bearing
It mainly bears radial load, and also can bear axial load and radial load at the same time. When it only bears radial load, the contact angle is zero. When the deep groove ball bearing has a large radial clearance, it has the performance of angular contact bearing and can withstand large axial load. The friction coefficient of the deep groove ball bearing is very small, and the limit speed is also very high.

Characteristics of deep groove ball bearing
Deep groove ball bearings are suitable for high speed operation, and they are very durable without frequent maintenance. This kind of bearing has the characteristics of small friction coefficient, high limit speed, various sizes and forms; they are used in precision instruments, low noise motor, automobile, motorcycle and general machinery and other industries. It is 1 of the most widely used bearing in mechanical industry. It mainly bears radial load, and also can bear a certain amount of axial load.

Advantage:
1.Deep groove ball bearing— CZPT to carry high loads
2.With carbon chrome steel ball bearing/ceramic ball bearing
3.more quietly than croller bearings
4.Deep groove ball bearing—-Low noise.Stable performance and durable
5.Deep groove ball bearing—-Able to work in sub-zero temperatures and have low rolling resistance
6.Deep groove ball bearing—-Suitable for countless applications.

PRODUCTION PROCESS

BUSINESS PARTENER

PACKING&SHIPPING

Package                 
1. tube package/ outer carton
2. tube package/ outer carton / pallets 
3.small sealing bag/outer carton
4. according to client’s requirements 

Shipping  
By Air  / By Sea /By Express
 a. For small weight or Urgent, goods will be delivery  by Express DHL/FedEX/UPS/TNT/EMS
 b. For max production,goods will be shipped by sea/by air.
 c. According to your requirements

FAQ
Q1:What is your Before-sales Service?
1>. Offer to bear related consultation about technology and application;

2>.Help customers with bearing choice, clearance configuration, products’ life and reliability analysis;

3>. Offer highly cost-effective and complete solution program according to site conditions;

4>. Offer localized program on introduced equipment to save running cost

Q2: What is your After-sales Service?
1>. Offer training about bearing installation and maintenance;

2>.Help customers with trouble diagnosis and failure analysis;

Q3: How about your company’s strength?
1>A.FREE SAMPLES:
contact us by email or trade manager, we will send the free samples according to your request.

    B.LOW MOQ
For the standard size bearings, even one, we also accept.
 

2>. World-Class Bearing:
We provide our customers with miniature deep groove ball bearings with world-class quality.

3>.OEM or Non-Stand Bearings:
Any requirement for Nonstandard roller bearings is Easily Fulfilled by us due to we have a strong professional team, professional production, testing equipment, professional sales and after sale service team.

4>. After Sales Service and Technical Assistance:
The company provides after-sales service and technical assistance as per the customer’s requirements and needs.

5>.Quick Delivery:
1-3 workingdays for the stock goods.
1-3 weeks of production, depending on the order qty.

Q4: What will we do if you are not satisfied with the product?
A: If have any abnormal, please contact us at the first time, we will immediately process

Q5: Is optional lubrication provided?
A: We can offer a wide range of oils and greases for a variety of applications. Please contact our engineer for technical assistance with any special requirements

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Maintaining ball bearings is essential to ensure their longevity, reliable performance, and prevent premature failure. Proper maintenance practices can extend the lifespan of ball bearings and the equipment they are used in. Here are specific maintenance practices to consider:

  • Regular Lubrication:

Implement a regular lubrication schedule using the appropriate lubricant for the application. Lubrication reduces friction, prevents wear, and helps dissipate heat. Follow manufacturer guidelines for lubricant type, quantity, and frequency.

  • Clean Environment:

Keep the operating environment clean and free from contaminants. Dust, dirt, and debris can infiltrate bearings and cause damage. Use seals or shields to protect bearings from contaminants, especially in harsh environments.

  • Proper Installation:

Ensure correct installation of bearings using proper tools and techniques. Improper installation can lead to misalignment, uneven load distribution, and premature wear. Follow manufacturer recommendations for installation procedures.

  • Regular Inspections:

Perform routine visual inspections to check for signs of wear, damage, or contamination. Regular inspections can help identify issues early and prevent further damage. Pay attention to noise, vibration, and temperature changes.

  • Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

  • Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

  • Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

  • Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

  • Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

  • Documented Records:

Keep records of maintenance activities, inspections, lubrication schedules, and any issues encountered. This documentation helps track the bearing’s performance over time and informs future maintenance decisions.

By implementing these maintenance practices, you can ensure the longevity of ball bearings, minimize downtime, reduce operational costs, and maintain the reliability of the equipment they are a part of.

Aligning: Non-Aligning Bearing
Separated: Unseparated
Rows Number: Single
Load Direction: Thrust Bearing
Material: Super Clean Bearing Steel
Working Test Temperature: 110
Samples:
US$ 7/Piece
1 Piece(Min.Order)

|
Request Sample

ball bearing

Are there any Industry Standards or Certifications that Ball Bearings should Meet?

Yes, there are several industry standards and certifications that ball bearings should meet to ensure their quality, performance, and reliability. These standards help manufacturers, engineers, and customers assess the suitability of bearings for specific applications. Some of the key standards and certifications for ball bearings include:

  • ISO Standards:

The International Organization for Standardization (ISO) has developed a series of standards related to ball bearings. ISO 15 defines dimensions, boundary dimensions, and tolerances for radial bearings. ISO 281 specifies dynamic load ratings and calculation methods for bearings’ life calculations.

  • ABEC (Annular Bearing Engineering Committee) Ratings:

ABEC ratings are commonly used in North America to indicate the precision and performance of ball bearings. Ratings range from ABEC 1 (lowest precision) to ABEC 9 (highest precision). However, it’s important to note that ABEC ratings focus primarily on dimensional tolerances and do not encompass all aspects of bearing quality.

  • DIN Standards:

The German Institute for Standardization (Deutsches Institut für Normung, DIN) has published various standards related to ball bearings. DIN 625 covers dimensions for deep groove ball bearings, while DIN 616 provides guidelines for precision angular contact ball bearings.

  • JIS (Japanese Industrial Standards):

JIS standards are used in Japan and internationally to define the characteristics and dimensions of various products, including ball bearings. JIS B 1512 outlines the classification and dimensions of rolling bearings.

  • ASTM (American Society for Testing and Materials) Standards:

ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.

  • CE Marking:

CE marking indicates that a product complies with European Union health, safety, and environmental requirements. It may be required for bearings used in machinery intended to be sold within the EU market.

  • Industry-Specific Standards:

Various industries, such as aerospace, automotive, medical, and nuclear, have specific standards or certifications that bearings must meet to ensure safety, reliability, and compliance with industry-specific requirements.

  • Quality Management Systems:

Manufacturers that adhere to quality management systems, such as ISO 9001, demonstrate their commitment to consistent product quality and customer satisfaction. Certification to these systems indicates that the manufacturing process follows established protocols and best practices.

When selecting ball bearings, it’s important to consider the relevant standards and certifications that align with the application’s requirements. This ensures that the bearings meet recognized quality and performance criteria, ultimately contributing to reliable and efficient operation.

Customization:
Available

|

Customized Request

ball bearing

Can you Explain the Various Types of Ball Bearings and their Specific Use Cases?

Ball bearings come in various types, each designed to meet specific application requirements. Here’s an overview of the different types of ball bearings and their specific use cases:

  • Deep Groove Ball Bearings:

Deep groove ball bearings are the most common and versatile type. They have a deep raceway that allows them to handle both radial and axial loads. They are used in a wide range of applications, including electric motors, household appliances, automotive components, and industrial machinery.

  • Angular Contact Ball Bearings:

Angular contact ball bearings have a contact angle that enables them to handle both radial and axial loads at specific angles. They are suitable for applications where combined loads or thrust loads need to be supported, such as in machine tool spindles, pumps, and agricultural equipment.

  • Self-Aligning Ball Bearings:

Self-aligning ball bearings have two rows of balls and are designed to accommodate misalignment between the shaft and the housing. They are used in applications where shaft deflection or misalignment is common, such as conveyor systems, textile machinery, and paper mills.

  • Thrust Ball Bearings:

Thrust ball bearings are designed to support axial loads in one direction. They are commonly used in applications where axial loads need to be supported, such as in automotive transmissions, steering systems, and crane hooks.

  • Single-Row vs. Double-Row Bearings:

Single-row ball bearings have a single set of balls and are suitable for moderate load and speed applications. Double-row ball bearings have two sets of balls and offer higher load-carrying capacity. Double-row designs are used in applications such as machine tool spindles and printing presses.

  • Miniature and Instrument Ball Bearings:

Miniature ball bearings are smaller in size and are used in applications with limited space and lower load requirements. They are commonly used in small electric motors, medical devices, and precision instruments.

  • Max-Type and Conrad Bearings:

Max-type ball bearings have a larger number of balls to increase load-carrying capacity. Conrad bearings have fewer balls and are used in applications with moderate loads and speeds.

  • High-Precision Ball Bearings:

High-precision ball bearings are designed for applications where accuracy and precision are critical, such as machine tool spindles, aerospace components, and optical instruments.

  • High-Speed Ball Bearings:

High-speed ball bearings are engineered to minimize friction and accommodate rapid rotation. They are used in applications such as dental handpieces, turbochargers, and centrifuges.

In summary, the various types of ball bearings are tailored to different application requirements, including load type, direction, speed, and environmental conditions. Selecting the appropriate type of ball bearing ensures optimal performance and longevity in specific applications.

China Best Sales High Speed Deep Groove Ball Bearing of New Energy Cars 6206   bearing and raceChina Best Sales High Speed Deep Groove Ball Bearing of New Energy Cars 6206   bearing and race
editor by CX 2023-08-29

Steel Ball Bearings

As one of the leading steel ball bearings manufacturers, suppliers, and exporters of mechanical products, We offer steel ball bearings and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of steel ball bearings.

Recent Posts