Product Description

1.Specification of the mounted ball bearing units

1)Pillow block a are most extensively used among the bearing units:UCP,UCPE,UCAK and SBLP,SBLLP.These types are fixed to the shafts by means of the setscrews prepared in the innerring.

2)NAP,SALP and SALLP types are fixed to the shafts by the setscrews prepared in the eccentric locking collor.

3)UKP type is mounted to the shafts by use of adapter sleeves

4)Housing P200 series could be machined grooves on both sides to be mounted with metal covers for dust prevention and safty purpose.

2.The main products of our factory

– Cast iron pillow blocks

– Thermoplastic bearing housing

– All stainless steel mounted units.

– Accu-Grip Concentric lock Bearing Units(New!)

– Rod ends

– Spherical plain bearings

– Agriculture Bearings(Disc Harrow Bearings)

    
 

Bearing mm h a e b S1 S2 g w n Bi
UCP202 15 30.2 127 95 38 13 19 14 62 11.5 27.4
UCP203 17 30.2 127 95 38 13 19 14 62 11.5 27.4
UCP204 20 33.3 127 95 38 13 19 14 65 12.3 31
UCP205 25 36.5 140 105 38 13 19 15 71 14.3 34.1
UCP206 30 42.9 165 121 48 17 21 17 83 15.9 38.1
UCP207 35 47.6 167 127 48 17 21 18 93 17.5 42.9
UCP208 40 49.2 184 137 54 17 21 18 98 19 49.2
UCP209 45 54 190 146 54 17 21 20 106 19 49.2
UCP210 50 57.2 206 159 60 20 25 21 114 19 51.6
UCP211 55 63.5 219 171 60 20 25 23 126 22.2 55.6
UCP212 60 69.8 241 184 70 20 25 25 138 25.4 65.1
UCP213 65 76.2 265 203 70 25 29 27 151 25.4 65.1
UCP214 70 79.4 266 210 72 25 31 27 157 30.2 74.6
UCP215 75 82.6 275 217 74 25 31 28 163 33.3 77.8
UCP216 80 88.9 292 232 78 25 31 30 175 33.3 82.6
UCP217 85 95.2 310 247 83 25 31 32 1870 34.1 85.7
UCP218 90 102 327 262 88 27 33 33 200 39.7 96

   
 

Bearing mm a e b i g l z s n Bi
UCFL202 15 113 90 60 15 12 25.5 30.9 12 11.5 27.4
UCFL203 17 113 90 60 15 12 25.5 30.3 12 11.5 27.4
UCFL204 20 113 90 60 15 12 25.5 33.7 12 12.3 31
UCFL205 25 130 99 68 16 14 27 35.8 16 14.3 34.1
UCFL206 30 148 117 80 18 14 31 40.2 16 15.9 38.1
UCFL207 35 161 130 90 19 16 34 44.4 16 17.5 42.9
UCFL208 40 175 144 100 21 16 36 51.2 16 19 49.2
UCFL209 45 188 148 108 22 18 38 52.2 19 19 49.2

 

Bearing mm h a e b
UCC202 15 72 20 11.5 27.4
UCC203 17 72 20 11.5 27.4
UCC204 20 72 20 12.3 31
UCC205 25 80 22 14.3 34.1
UCC206 30 85 27 15.9 38.1
UCC207 35 90 28 17.5 42.9
UCC208 40 100 30 19 49.2
UCC209 45 110 31 19 49.2

 

Contact Angle: 25°
Aligning: Aligning Bearing
Separated: Separated
Rows Number: Multiple
Load Direction: Radial Bearing
Material: Carbon Steel

###

Samples:
US$ 4/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Bearing mm h a e b S1 S2 g w n Bi
UCP202 15 30.2 127 95 38 13 19 14 62 11.5 27.4
UCP203 17 30.2 127 95 38 13 19 14 62 11.5 27.4
UCP204 20 33.3 127 95 38 13 19 14 65 12.3 31
UCP205 25 36.5 140 105 38 13 19 15 71 14.3 34.1
UCP206 30 42.9 165 121 48 17 21 17 83 15.9 38.1
UCP207 35 47.6 167 127 48 17 21 18 93 17.5 42.9
UCP208 40 49.2 184 137 54 17 21 18 98 19 49.2
UCP209 45 54 190 146 54 17 21 20 106 19 49.2
UCP210 50 57.2 206 159 60 20 25 21 114 19 51.6
UCP211 55 63.5 219 171 60 20 25 23 126 22.2 55.6
UCP212 60 69.8 241 184 70 20 25 25 138 25.4 65.1
UCP213 65 76.2 265 203 70 25 29 27 151 25.4 65.1
UCP214 70 79.4 266 210 72 25 31 27 157 30.2 74.6
UCP215 75 82.6 275 217 74 25 31 28 163 33.3 77.8
UCP216 80 88.9 292 232 78 25 31 30 175 33.3 82.6
UCP217 85 95.2 310 247 83 25 31 32 1870 34.1 85.7
UCP218 90 102 327 262 88 27 33 33 200 39.7 96

###

Bearing mm a e b i g l z s n Bi
UCFL202 15 113 90 60 15 12 25.5 30.9 12 11.5 27.4
UCFL203 17 113 90 60 15 12 25.5 30.3 12 11.5 27.4
UCFL204 20 113 90 60 15 12 25.5 33.7 12 12.3 31
UCFL205 25 130 99 68 16 14 27 35.8 16 14.3 34.1
UCFL206 30 148 117 80 18 14 31 40.2 16 15.9 38.1
UCFL207 35 161 130 90 19 16 34 44.4 16 17.5 42.9
UCFL208 40 175 144 100 21 16 36 51.2 16 19 49.2
UCFL209 45 188 148 108 22 18 38 52.2 19 19 49.2

###

Bearing mm h a e b
UCC202 15 72 20 11.5 27.4
UCC203 17 72 20 11.5 27.4
UCC204 20 72 20 12.3 31
UCC205 25 80 22 14.3 34.1
UCC206 30 85 27 15.9 38.1
UCC207 35 90 28 17.5 42.9
UCC208 40 100 30 19 49.2
UCC209 45 110 31 19 49.2
Contact Angle: 25°
Aligning: Aligning Bearing
Separated: Separated
Rows Number: Multiple
Load Direction: Radial Bearing
Material: Carbon Steel

###

Samples:
US$ 4/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Bearing mm h a e b S1 S2 g w n Bi
UCP202 15 30.2 127 95 38 13 19 14 62 11.5 27.4
UCP203 17 30.2 127 95 38 13 19 14 62 11.5 27.4
UCP204 20 33.3 127 95 38 13 19 14 65 12.3 31
UCP205 25 36.5 140 105 38 13 19 15 71 14.3 34.1
UCP206 30 42.9 165 121 48 17 21 17 83 15.9 38.1
UCP207 35 47.6 167 127 48 17 21 18 93 17.5 42.9
UCP208 40 49.2 184 137 54 17 21 18 98 19 49.2
UCP209 45 54 190 146 54 17 21 20 106 19 49.2
UCP210 50 57.2 206 159 60 20 25 21 114 19 51.6
UCP211 55 63.5 219 171 60 20 25 23 126 22.2 55.6
UCP212 60 69.8 241 184 70 20 25 25 138 25.4 65.1
UCP213 65 76.2 265 203 70 25 29 27 151 25.4 65.1
UCP214 70 79.4 266 210 72 25 31 27 157 30.2 74.6
UCP215 75 82.6 275 217 74 25 31 28 163 33.3 77.8
UCP216 80 88.9 292 232 78 25 31 30 175 33.3 82.6
UCP217 85 95.2 310 247 83 25 31 32 1870 34.1 85.7
UCP218 90 102 327 262 88 27 33 33 200 39.7 96

###

Bearing mm a e b i g l z s n Bi
UCFL202 15 113 90 60 15 12 25.5 30.9 12 11.5 27.4
UCFL203 17 113 90 60 15 12 25.5 30.3 12 11.5 27.4
UCFL204 20 113 90 60 15 12 25.5 33.7 12 12.3 31
UCFL205 25 130 99 68 16 14 27 35.8 16 14.3 34.1
UCFL206 30 148 117 80 18 14 31 40.2 16 15.9 38.1
UCFL207 35 161 130 90 19 16 34 44.4 16 17.5 42.9
UCFL208 40 175 144 100 21 16 36 51.2 16 19 49.2
UCFL209 45 188 148 108 22 18 38 52.2 19 19 49.2

###

Bearing mm h a e b
UCC202 15 72 20 11.5 27.4
UCC203 17 72 20 11.5 27.4
UCC204 20 72 20 12.3 31
UCC205 25 80 22 14.3 34.1
UCC206 30 85 27 15.9 38.1
UCC207 35 90 28 17.5 42.9
UCC208 40 100 30 19 49.2
UCC209 45 110 31 19 49.2

Industrial applications of casing

For rotating and sliding parts, bushings are an important part of the machine. Due to their anti-friction properties and load-carrying capacity, they are an important part of many different industrial processes. Bushings play a vital role in industries such as construction, mining, hydropower, agriculture, transportation, food processing and material handling. To learn more about the benefits of bushings, read on. You’ll be amazed how much they can help your business!
bushing

type

When comparing enclosure types, consider the material and how it will be used. Oilite bushings are made of porous material that draws lubricant into the liner and releases it when pressure is applied. These are manufactured using a sintered or powered metal process. Copper and tin are the most commonly used materials for making copper bushings, but there are other types of metal bushings as well.
Another popular type is the plain bearing. This type reduces friction between the rotating shaft and the stationary support element. This type provides support and load bearing while relying on soft metal or plastic for lubrication. Journal bearings are used to support the linear motion of the engine crankshaft in large turbines. They are usually babbitt or hydrodynamic with a liquid film lubricant between the two halves.
The oil-impregnated paper sleeve is made of high-quality kraft insulating paper. These bushings contain two layers of capacitor grading, with the innermost layer electrically connected to the mounting flange. These are mature processes and are widely used in different voltage levels. CZPT Electric (Group) Co., Ltd. provides UHV DC and AC oil-impregnated paper wall bushings for environmental control rooms.
Electrical bushings are used to transmit electricity. These can be transformers, circuit breakers, shunt reactors and power capacitors. The bushing can be built into the bushing or through the bushing. The conductors must be able to carry the rated current without overheating the adjacent insulation. A typical bushing design has a conductor made of copper or aluminum with insulation on all other sides. If the bushing is used in a circuit, the insulation needs to be high enough to prevent any leakage paths.
Voltage and current ratings of electrical bushings. Solid type electrical bushings typically have a center conductor and a porcelain or epoxy insulator. These bushings are used in small distribution transformers and large generator step-up transformers. Their test voltage is typically around 70 kV. Subsequent applications of this bushing may require a lower halfway release limit. However, this is a common type for many other applications.
bushing

application

Various industrial applications involve the use of casing. It is an excellent mechanical and chemical material with a wide range of properties. These compounds are also packaged according to national and international standards. Therefore, bushings are used in many different types of machines and equipment. This article will focus on the main industrial applications of casing. This article will also explain what a casing is and what it can do. For more information, click here. Casing application
Among other uses, bushing assemblies are used in aircraft and machinery. For example, a fuel tank of an aircraft may include baffle isolator 40 . The bushing assembly 16 serves as an interface to the fuel tank, allowing electrical current to flow. It can also be used to isolate one component from another. In some cases, bushing assemblies are used to provide a tight fit and reduce electrical resistance, which is important in circuits.
The benefits of casing go beyond reducing energy transmission. They reduce lubrication costs. If two metal parts are in direct contact, lubrication is required. Thus, the bushing reduces the need for lubrication. They also allow parts of the car to move freely. For example, rubber bushings may begin to deteriorate due to high internal temperatures or cold weather. Also, oil can affect their performance.
For example, bushing CTs in oil and gas circuit breakers are used as window current transformers. It consists of a toroidal core and secondary windings. The center conductor of the bushing acts as the single-turn primary of the BCT. By tapping the secondary winding, the ratio between primary and secondary can be changed. This information can be found on the asset nameplate.
Among other uses, bushings are used in diagnostic equipment. These components require precise positioning. Fortunately, air sleeves are perfect for this purpose. Their frictionless operation eliminates the possibility of misalignment. In addition, products based on porous media help minimize noise. A casing manufacturer can advise you on the best product for your equipment. Therefore, if you are looking for replacement bushings for your existing equipment, please feel free to contact Daikin.

Material

Dry ferrule cores were selected for study and examined under an Olympus polarizing microscope (BX51-P). Core slices showing layers of aluminum foil with a distance of approximately 2 cm between adjacent capacitor screens. The aluminum foil surface has a multi-layered structure with undulations due to shrinkage and crepe. Differences between the two types of foils are also revealed.
A typical metal bushing material consists of a high-strength metal backing and a solid lubricant. These materials have higher load-carrying capacity and low friction during operation. Additionally, they are precision machined to tight tolerances. They also offer better thermal conductivity and better fatigue resistance. The accuracy of the metal bushing is improved due to the re-machining process that takes place after the bearing is assembled. Additionally, metal bushing materials are more resistant to wear than plastic bushing materials.
Plastic bushings are relatively inexpensive and readily available off the shelf. Also, the price of custom plastic bushings is relatively low. However, they are not recommended for heavy duty applications. Plastics degrade under high loads and can damage mating parts. Also, if the plastic bushings are not manufactured accurately, they can become misaligned. These are just some of the reasons for choosing metal bushings over plastic.
A mechanically bonded bushing 40 is placed over the stabilizer bar and compressed into the outer sleeve/bracket assembly. The outer metal member includes slotted holes that compensate for the tolerance stacking between the first and second bushing assemblies. Pre-assembly allows the assembly plant to receive a complete assembly ready for vehicle assembly, rather than sub-assembly at the vehicle manufacturing plant.
bushing

cost

Control arm bushings are a major component of modern vehicle suspension systems. Damaged bushings can negatively affect the handling and performance of your car. Replacing bushings on a car can cost $200 to $500. While that’s pretty cheap for a handful of control bushings, replacing the entire suspension system could set you back over $1,200. Thankfully, if you want to repair or replace the bushing yourself, you can do it yourself for a fraction of the cost.
If you decide to replace the control arm bushing yourself, it’s best to shop around for the best price. Many auto parts stores offer cheaper bushings that you don’t have to spend a fortune on. Even if you don’t drive for years, rubber can degrade and create cracks in the material. These cracks can be as deep as three-eighths of an inch. This makes it dangerous to drive a car with damaged control arm bushings.
Hiring a mechanic might be a good idea if you don’t like doing the work yourself. You can save money and time by repairing the control arm yourself, but you may have to hire a mechanic to do the job. Replacing the front sway bar bushing alone can cost between $450 and $900. While these components are relatively inexpensive, you can replace them for a better-handling car.
In some cases, sizing the bushings is a more economical option, but if you want to replace your entire suspension system, it’s better to buy a brand new lower limit. You can even save labor by buying a replacement part fork with a good lower portion. In addition to improving your car’s handling and ride, new bushings will add to your car’s overall value. If you are not sure which parts you need, ask your mechanic for a quote.
While the cost of replacing control arm bushings is relatively low, it’s a good idea to compare quotes from multiple mechanics. By getting multiple quotes for the same repair, you can save as much as $50 to $100 on the total cost of your car. In addition to labor costs, parts and labor can vary, so shop around to find the mechanic best suited for your car. There’s no reason to settle for sub-par service when you can save $50 or more!

China P205 P206 P207 Saf Pillow UCP205 CAD Base Bearing Ukp Unit UCP 206 F205 Pillow Block Bearing     bearing assemblyChina P205 P206 P207 Saf Pillow UCP205 CAD Base Bearing Ukp Unit UCP 206 F205 Pillow Block Bearing     bearing assembly
editor by czh 2022-11-26

Steel Ball Bearings

As one of the leading steel ball bearings manufacturers, suppliers, and exporters of mechanical products, We offer steel ball bearings and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of steel ball bearings.

Recent Posts