Product Description

Product Description

6000 series deep groove ball bearings

other bearings series:
product-list-1.html

 

Bearing NO (mm)Boundary Dimensions (Kn) (Kn) (r/min)
Limit Rotational Speed
(Kg)
Weight
d D B Dynamic Load Rating
Cr
Static Load Rating
Cor
Grease Lubrication Oil Lubrication
6000 10 26 8 4.58 1.97 30000 36000 0.019
6001 12 28 8 5.11 2.39 28000 32000 0.571
6002 15 32 9 5.59 2.84 24000 28000 0.03
6003 17 35 10 6.00 3.25 22000 26000 0.04
6004 20 42 12 9.38 5.03 18000 20000 0.068
6005 25 47 12 10.06 5.85 15000 18000 0.079
6006 30 55 13 13.23 8.30 13000 15000 0.113
6007 35 62 14 16.21 10.42 11000 13000 0.149
6008 40 68 15 17.03 11.70 10000 12000 0.185
6009 45 75 16 21.09 14.77 9000 11000 0.231
6571 50 80 16 22.02 16.25 8500 10000 0.25
6011 55 90 18 30.26 21.93 7500 9000 0.362
6012 60 95 18 31.66 24.22 7100 8500 0.385
6013 65 100 18 32.06 24.89 6700 8000 0.408
6014 70 110 20 38.59 30.43 6000 7100 0.537
6015 75 115 20 40.20 33.20 5600 6700 0.603
6016 80 125 22 47.50 39.80 5300 6300 0.821
6017 85 130 22 50.80 42.80 5000 6000 0.848
6018 90 140 24 58.00 49.80 4800 5600 1.103
Note:Above-mentioned products include its modification series,such as Z, 2Z,RS, and 2RS etc.

 

Detailed Photos

 


Black chamfer with rubber seal

Black chamfer with white dust cover

open UG

white chamfer with Yellow dust cover

THE USE OF THE BEARING
Some tips on use
Rolling bearing is a precise part. Therefore it should be used carefully. No matter how high performance the bearing has, it can be obtained by improper use, the followings are the points for attention to use bearings.
(1) Keep clean the bearing and its surrounding areas
It is harmful to the bearing even by tiny dust which can not be seen by human eyes. Therefore it should always keep clean the surrounding environments in order to prevent the bearing from dust corrosion.
(2) Use bearing carefully
Scar and indentation can essily be produced out of strong impact to the bearing in use and become the cause of accidents. Therefore special caution should be given to its use.
(3) Use the appropriate operating tool
Avoid using a hammer or heavy direct tap on a bearing or sleeve, must use appropriate tools such as press or heating.
(4) Be careful to the rust corrosion of the bearings
The sweat in the hands will cause rust in operating the bearings. Therefore your hands should be cleanly washed and dried before operation. You’d better wear gloves in doing the work. 
(5) Handler should familiar with bearing
(6) Establish bearing handling criteri
·Bearing storage
.Bearing and surrounding cleaning
.Dimension of mounting parts and inspection
.Machining quality
.Mounting handing
.After mounting inspection
·Disassembly handing
·Keep maintain
·Adding lubricant

 

Installation Instructions

 Bearing mounting
 Precautions for proper mounting of bearing
1) Bearing preparation
Bearing should not be unpacked until before mounting due to spray anti-corrosion oil and pack anti-corrosion paper. In addition, spray anti-corrosion oil on bearing have good lubricate function. For general purpose, just directly using bearing fill-in grease bearings, without cleaning. However, bearing for instrument or high speed rotating must be cleaned with clean filtered oil in order to remove the anti-corrosion oil. At that time, the bearings are easy to corrosion could not storage long term.
2) Inspection of shafts and housings
Cleaning shaft and housing, confirming no scratched or machine burrs, no CZPT and cutting piece in housing. Secondly comppare with drawing, the shaft and housing of dimension, form and machining quality should be inspected.
chart 1 Measure location for shaft diameter                                                                         chart 2  Measure location for housing bore diameter                       

As chart 1 and chart 2 showing, divided several locations to be measure on shaft and housing bore diameters, It should be careful inspected perpendicular between shaft, housing fillet dimension and shoulder.
Before mounting bearing, it should be sprayed mechanical oil on fitting surface after check out the shaft and housing.

Bearing storage
Before leaving the factory, the bearing is sprayed proper rust-inhibiting oil and packed rust-inhibiting paper. The quality of bearing is guaranteed, if the packing is not broken.
For long-term storage, if the humidity less than 65% and the temperature about 20, it should storage on shelf which is higher 30cm than ground.
In addition, storage occasion should avoid sunshine and contact with cold wall.

Pictures about packaging

 

Company Profile

Our Advantages

1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 
SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
    pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS standard bearings. 
2. MOQ: 1000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Motor Parts: Motor Bearing
Water Pump Parts: Water Pump Bearing
Air Compressor Parts: Air Compressor Bearing
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

black or white or as required
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

steel ball bearing

What is the role of cage design and materials in steel ball bearing performance and durability?

The cage design and materials used in steel ball bearings play a crucial role in determining their performance and durability. The cage, also known as the bearing retainer or separator, holds the steel balls in position and maintains the proper spacing between them. It prevents the balls from coming into contact with each other, which could lead to excessive friction, wear, and damage. Here’s an explanation of the role of cage design and materials in steel ball bearing performance and durability:

1. Ball Guidance and Positioning:

The primary function of the cage is to guide and position the steel balls within the bearing. The cage ensures that the balls are evenly distributed around the bearing raceways, maintaining proper alignment and preventing contact between adjacent balls. This guidance and positioning function is crucial for achieving smooth and efficient rolling motion, reducing friction, and optimizing the performance of the bearing.

2. Friction and Heat Reduction:

The cage design and materials can significantly impact the friction and heat generated during bearing operation. An efficient cage design allows for proper ball rotation while minimizing contact and sliding friction between the balls and the cage itself. This reduced friction helps to minimize energy loss and heat generation, improving the overall efficiency and durability of the bearing. Additionally, some cage materials have low thermal conductivity, which can further contribute to heat reduction and prevent overheating of the bearing.

3. Load Distribution:

The cage also plays a role in distributing the applied loads evenly among the steel balls. By maintaining the correct spacing between the balls, the cage helps to distribute the radial and axial loads across a larger contact area. This load distribution capability prevents localized stresses and reduces the risk of premature wear or failure of the bearing. A well-designed cage ensures that the bearing can handle higher loads and provides improved durability under demanding operating conditions.

4. Lubricant Retention:

The cage design can impact the retention and distribution of lubricant within the bearing. Proper lubrication is essential for reducing friction, preventing wear, and protecting against corrosion. The cage should allow for sufficient lubricant flow and retention, ensuring that the balls and raceways are adequately lubricated during operation. An effective cage design promotes the proper distribution and retention of lubricant, enhancing the overall performance and durability of the bearing.

5. Material Compatibility and Durability:

The choice of cage materials is critical for the durability and performance of steel ball bearings. The cage materials must be compatible with the bearing operating conditions, including factors such as speed, temperature, and exposure to corrosive environments. Common cage materials include steel, brass, bronze, synthetic resins, and polymers. Each material has its own advantages and limitations in terms of strength, wear resistance, corrosion resistance, and temperature resistance. The selection of the appropriate cage material ensures the long-term durability and reliable operation of the bearing under specific application requirements.

6. Noise and Vibration Control:

The cage design can also influence the level of noise and vibration generated by the bearing during operation. A well-designed cage can help reduce noise and vibration by maintaining ball stability, minimizing ball-to-cage and ball-to-raceway contact, and dampening oscillations. This noise and vibration control not only improves user comfort but also reduces the risk of damage to other components in the machinery or equipment.

7. Application-Specific Considerations:

In some cases, the cage design and materials may need to be tailored to specific application requirements. For example, in high-speed applications, cages with low mass and low centrifugal forces may be preferred to minimize the risk of cage deformation or imbalance. In environments with exposure to chemicals or extreme temperatures, cage materials with excellent chemical resistance or high-temperature stability may be necessary. Application-specific considerations ensure that the cage design and materials are optimized for the specific operating conditions, further enhancing bearing performance and durability.

In summary, the cage design and materials used in steel ball bearings play a vital role in their performance and durability. The cage provides ball guidance, reduces friction and heat, distributes loads, retains lubricant, and controls noise and vibration. The choice of cage materials must consider factors such as compatibility, durability, and application-specific requirements to ensure optimal bearing performance and long-term reliability.

steel ball bearing

Can you explain the installation and alignment considerations for steel ball bearings?

Proper installation and alignment are critical for the optimal performance and longevity of steel ball bearings. Let’s explore the key considerations for installing and aligning these bearings:

1. Cleanliness:

Prior to installation, it is essential to ensure that the bearing housing, shaft, and surrounding components are clean and free from dirt, debris, and contaminants. Any particles or impurities can affect the bearing’s performance and cause premature wear or damage. Cleaning the surfaces thoroughly and using appropriate cleaning agents or solvents is recommended.

2. Shaft and Housing Tolerances:

Steel ball bearings require precise shaft and housing tolerances for proper fit and alignment. It is crucial to follow the manufacturer’s specifications and guidelines for the recommended tolerance range. Excessive clearance or interference can lead to improper load distribution, increased friction, and premature failure of the bearing.

3. Bearing Handling:

When handling steel ball bearings, care should be taken to avoid dropping or impacting the bearing. Rough handling can cause damage to the balls, raceways, or cage, compromising the bearing’s performance. It is advisable to use clean gloves and suitable tools to prevent contamination or accidental damage during the installation process.

4. Mounting Methods:

There are various methods for mounting steel ball bearings, including press fitting, thermal expansion, and using mounting tools. The chosen method should be appropriate for the bearing size, type, and application. Applying force evenly and gradually while avoiding excessive pressure is crucial to prevent bearing distortions or misalignment during mounting.

5. Lubrication:

Prior to installation, the bearing should be properly lubricated with the recommended lubricant. Lubrication ensures smooth operation, reduces friction, and protects against premature wear. The appropriate quantity and type of lubricant should be applied according to the manufacturer’s instructions, taking into account factors such as speed, load, and operating conditions.

6. Bearing Alignment:

Proper alignment of steel ball bearings is essential for even load distribution and minimizing stress on the bearing components. Misalignment can lead to increased friction, vibration, and premature failure. Aligning the bearing with the shaft and housing using appropriate alignment tools or techniques, such as dial indicators or laser alignment systems, helps ensure optimal performance and longevity.

7. Preload and Clearance:

Depending on the application, preload or clearance adjustments may be necessary to achieve the desired performance. Preload refers to applying a slight internal axial load to eliminate internal clearance, while clearance allows for a certain level of axial or radial play. The appropriate preload or clearance should be determined based on the manufacturer’s recommendations and the specific operating conditions.

8. Post-Installation Checks:

After the bearing is installed, it is important to perform post-installation checks to verify proper alignment, smooth rotation, and absence of abnormal noise or vibration. These checks can involve verifying the bearing’s axial and radial runout, conducting visual inspections, and monitoring the bearing’s performance during the initial operation.

By considering these installation and alignment considerations for steel ball bearings, it is possible to ensure the correct fit, alignment, and performance of the bearings. Proper installation and alignment contribute to reduced friction, extended bearing life, and reliable operation in various industrial applications.

steel ball bearing

Can you explain the key characteristics and advantages of steel ball bearings?

Steel ball bearings possess several key characteristics and offer numerous advantages in various applications. Let’s explore them in detail:

1. Low Friction: Steel ball bearings have a low coefficient of friction due to the rolling contact between the balls and the raceways. This reduces the resistance to motion, resulting in improved efficiency and energy savings in mechanical systems.

2. Load Capacity: Steel ball bearings have excellent load-carrying capacity. The spherical shape of the balls enables them to distribute loads evenly across the raceways, allowing the bearings to handle both radial and axial loads effectively.

3. High-Speed Operation: Due to their efficient rolling action and low friction, steel ball bearings are well-suited for high-speed applications. They enable smooth rotation at elevated speeds, making them widely used in machinery and equipment requiring rapid motion.

4. Versatility: Steel ball bearings are available in various sizes, configurations, and precision levels, allowing for versatility in different applications. They can accommodate diverse operating conditions and fit the specific requirements of a wide range of mechanical systems.

5. Durability: Steel ball bearings are highly durable and resistant to wear. The balls and raceways are typically made from hardened steel, providing excellent strength and longevity. This enables the bearings to withstand heavy loads and operate reliably even in demanding environments.

6. Low Maintenance: Steel ball bearings require minimal maintenance when properly lubricated. Regular lubrication helps to reduce friction, prevent corrosion, and extend the service life of the bearings. This low maintenance requirement contributes to cost savings and operational efficiency.

7. Wide Application Range: Steel ball bearings find applications in a diverse range of industries and systems. They are commonly used in automotive components, industrial machinery, electric motors, household appliances, aerospace equipment, and more. Their versatility and performance make them a popular choice across various sectors.

8. Cost-Effective: Steel ball bearings offer a cost-effective solution for many applications. They provide a balance between performance, durability, and affordability, making them widely accessible and economically viable for a range of mechanical systems.

In summary, steel ball bearings exhibit low friction, high load capacity, suitability for high-speed operation, versatility, durability, low maintenance requirements, wide applicability, and cost-effectiveness. These characteristics and advantages make steel ball bearings a fundamental component in numerous industries, contributing to efficient and reliable mechanical systems.

China Professional 6011 Z, Zz, 2RS, 2rz, High Carbon Chromium Gcr15 Bearing Steel P6 Grade Z3V3 C3 Deep Groove Ball Bearing   bearing blockChina Professional 6011 Z, Zz, 2RS, 2rz, High Carbon Chromium Gcr15 Bearing Steel P6 Grade Z3V3 C3 Deep Groove Ball Bearing   bearing block
editor by CX 2024-05-16

Steel Ball Bearings

As one of the leading steel ball bearings manufacturers, suppliers, and exporters of mechanical products, We offer steel ball bearings and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of steel ball bearings.

Recent Posts