Product Description

 

Product Description

Item No.:  SS6006-2RS

Type: Deep Groove Ball Bearing

Material: Stainless Steel(AISI440C/9Cr18)

Bore diameter: 30mm Outer diameter : 55mm Width(Height/Thickness): 13mm

Size: 30*55*13mm

Dynamic load C0: 13.2 Static load C0r: 8.30 Grease: 13000 Oil: 15000

Cage(retainer): Ribbon Cage(SPCC/T8)

Closures:2 Rubber seals(NBR)

Balls: Stainless Steel Balls

Lubrication: Grease

 

 

Item No. Bore diameter
(mm)
Outer diameter
(mm)
Width(Height/Thickness)
(mm)
Closures
SS6005-2RS 30 55 13 2 Rubber seals(NBR)

 

Detailed Photos

 

SS6006-2RS
 

 

Our Advantages

 Compared with ordinary bearings, stainless steel bearings have distinct material advantage because stainless steel bearings
have more wide application than ordinary bearings. In rusty and corrosive environment, the cost performance of stainless steel
bearings is outstanding specially.

 Stainless Steel Bearing:
1. stronger anti-rust property and anti-corrosion property.
2. CZPT to serve under -60ºC~+300ºC.
3. resist humidity and corrosion caused by other media.
4. has a deep bearing raceway groove, and the fit between the bearing raceway and the ball is extremely high.
5. high mechanical strength and large loading capacity.

 Our company provides high-precision homemade bearing of ordinary material, including deep groove ball bearing and full complement cylindrical roller bearings.
 The material refers to high-quality bearing steel, thermal treatment technology is put under strict control, and it is CZPT to carry out cryogenic treatment. And full complement cylindrical roller bearings adopts advanced roller CZPT for thermal treatment. Other technologies are all processed by full-automatic and semiautomatic equipment, and the production technology and quality control are arranged as per P5 precision. It products widely support home and abroad manufacturers of electric tools, mechanical equipment, automobile components, etc.
 

Manufacture Equipment

 

Company Profile

HangZhou WOLEE INDUSTRIAL CO.,LTD

 HangZhou WOLEE induststial Co., Ltd. was founded in 2015. It is a professional company which engages in import and export of industrial components and is a professional production base with joint stocks.

 The company mainly operates bearings and other industrial components such as chain, CZPT rail, gear and micro gearbox. Its products are widely used in the fields of metallurgy, mining, papermaking, petrochemical, power, railway, aviation, cement, textile, machinery, etc., it has lots of clients among these fields and has accumulated rich experience to meet different demands of all sectors. At present, its trade scale expands increasingly, its clients are all across the world, and it wins the trust of home and abroad clients by virtue of good reputation.

 The company adheres to the tenet of “people first, quality first, credit first and reputation first” and provides each client with top service.

 It heartily hopes to join hands with you to create a wonderful world.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Model No.: Ss6006-2RS
Lubrication: Grease
Grease: 13000
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

steel ball bearing

What are the eco-friendly or sustainable aspects of steel ball bearing materials?

Steel ball bearing materials offer several eco-friendly and sustainable aspects that align with the growing emphasis on environmental responsibility. Here are some key eco-friendly and sustainable aspects of steel ball bearing materials:

1. Recyclability:

Steel ball bearing materials, primarily composed of steel alloys, are highly recyclable. At the end of their service life, steel bearings can be recycled and used as feedstock for the production of new steel products. The recycling process helps conserve natural resources, reduces energy consumption, and minimizes waste generation. Additionally, the recycling of steel contributes to the reduction of carbon emissions associated with steel production.

2. Longevity and Durability:

Steel ball bearings are known for their longevity and durability. They can withstand heavy loads, high speeds, and harsh operating conditions. The long service life of steel bearings reduces the need for frequent replacements, resulting in lower waste generation and resource consumption. The durability of steel bearings also translates into reduced maintenance requirements and associated environmental impacts, such as the use of lubricants or the disposal of worn-out bearings.

3. Energy Efficiency:

Steel ball bearings contribute to energy efficiency in various applications. By reducing friction and minimizing energy losses, they help improve the efficiency of rotating machinery, such as motors, generators, or industrial equipment. The use of high-quality steel alloys, advanced bearing designs, and optimized lubrication techniques further enhance energy efficiency. The overall energy savings achieved through the application of steel ball bearings contribute to reduced energy consumption and lower greenhouse gas emissions.

4. Reduced Environmental Impact:

Steel ball bearings have a relatively low environmental impact compared to alternative bearing materials. The production of steel bearings involves well-established manufacturing processes that have efficient resource utilization and lower environmental footprint. Steel alloys used in bearing manufacturing are often sourced from recycled materials or produced through processes with reduced energy intensity. Additionally, advancements in surface coatings and lubrication technologies help minimize the environmental impact by reducing friction, wear, and the need for hazardous lubricants.

5. Compatibility with Sustainable Practices:

Steel ball bearings are compatible with sustainable practices in various industries. They can be integrated into systems that prioritize energy efficiency, renewable energy utilization, and reduced emissions. Steel bearings find applications in renewable energy technologies, such as wind turbines or solar tracking systems, where their durability, efficiency, and recyclability contribute to the overall sustainability of these systems. Moreover, the long service life and reliability of steel bearings reduce the need for frequent maintenance or replacement, aligning with sustainable maintenance practices.

6. Compliance with Environmental Regulations:

Steel ball bearings comply with environmental regulations and standards. Manufacturers adhere to environmental regulations related to material sourcing, manufacturing processes, waste management, and emissions control. Compliance with these regulations ensures that the production and use of steel ball bearings meet specific environmental criteria and minimize any potential negative impact on the environment.

Overall, steel ball bearing materials offer eco-friendly and sustainable aspects due to their recyclability, longevity, energy efficiency, reduced environmental impact, compatibility with sustainable practices, and compliance with environmental regulations. These aspects make steel ball bearings a preferred choice in industries striving for environmental responsibility and sustainability.

steel ball bearing

Can you explain the installation and alignment considerations for steel ball bearings?

Proper installation and alignment are critical for the optimal performance and longevity of steel ball bearings. Let’s explore the key considerations for installing and aligning these bearings:

1. Cleanliness:

Prior to installation, it is essential to ensure that the bearing housing, shaft, and surrounding components are clean and free from dirt, debris, and contaminants. Any particles or impurities can affect the bearing’s performance and cause premature wear or damage. Cleaning the surfaces thoroughly and using appropriate cleaning agents or solvents is recommended.

2. Shaft and Housing Tolerances:

Steel ball bearings require precise shaft and housing tolerances for proper fit and alignment. It is crucial to follow the manufacturer’s specifications and guidelines for the recommended tolerance range. Excessive clearance or interference can lead to improper load distribution, increased friction, and premature failure of the bearing.

3. Bearing Handling:

When handling steel ball bearings, care should be taken to avoid dropping or impacting the bearing. Rough handling can cause damage to the balls, raceways, or cage, compromising the bearing’s performance. It is advisable to use clean gloves and suitable tools to prevent contamination or accidental damage during the installation process.

4. Mounting Methods:

There are various methods for mounting steel ball bearings, including press fitting, thermal expansion, and using mounting tools. The chosen method should be appropriate for the bearing size, type, and application. Applying force evenly and gradually while avoiding excessive pressure is crucial to prevent bearing distortions or misalignment during mounting.

5. Lubrication:

Prior to installation, the bearing should be properly lubricated with the recommended lubricant. Lubrication ensures smooth operation, reduces friction, and protects against premature wear. The appropriate quantity and type of lubricant should be applied according to the manufacturer’s instructions, taking into account factors such as speed, load, and operating conditions.

6. Bearing Alignment:

Proper alignment of steel ball bearings is essential for even load distribution and minimizing stress on the bearing components. Misalignment can lead to increased friction, vibration, and premature failure. Aligning the bearing with the shaft and housing using appropriate alignment tools or techniques, such as dial indicators or laser alignment systems, helps ensure optimal performance and longevity.

7. Preload and Clearance:

Depending on the application, preload or clearance adjustments may be necessary to achieve the desired performance. Preload refers to applying a slight internal axial load to eliminate internal clearance, while clearance allows for a certain level of axial or radial play. The appropriate preload or clearance should be determined based on the manufacturer’s recommendations and the specific operating conditions.

8. Post-Installation Checks:

After the bearing is installed, it is important to perform post-installation checks to verify proper alignment, smooth rotation, and absence of abnormal noise or vibration. These checks can involve verifying the bearing’s axial and radial runout, conducting visual inspections, and monitoring the bearing’s performance during the initial operation.

By considering these installation and alignment considerations for steel ball bearings, it is possible to ensure the correct fit, alignment, and performance of the bearings. Proper installation and alignment contribute to reduced friction, extended bearing life, and reliable operation in various industrial applications.

steel ball bearing

How do steel ball bearings compare to other types of bearings, like roller bearings?

Steel ball bearings and roller bearings are two common types of bearings used in various applications. While they serve similar purposes of reducing friction and facilitating smooth motion, there are distinct differences between them. Let’s compare steel ball bearings to roller bearings:

1. Design: Steel ball bearings consist of small spherical balls that roll between the inner and outer raceways. Roller bearings, on the other hand, use cylindrical rollers that distribute the load over a larger contact area. The design of roller bearings allows them to handle higher loads compared to ball bearings.

2. Load Capacity: Roller bearings generally have a higher load-carrying capacity than ball bearings. The larger contact area of the rollers allows them to distribute the load more effectively, making roller bearings suitable for heavy-duty applications that require higher radial forces.

3. Friction and Speed: Steel ball bearings have lower frictional resistance compared to roller bearings. The point contact between the balls and the raceways results in reduced friction, making ball bearings well-suited for high-speed applications. Roller bearings, although having slightly higher friction, are better suited for applications that require higher radial forces and moderate speed.

4. Stiffness: Roller bearings exhibit higher stiffness compared to ball bearings. The larger contact area of the rollers provides greater support and resistance to deformation under heavy loads. This characteristic makes roller bearings more suitable for applications where rigidity and stability are crucial.

5. Application: The choice between steel ball bearings and roller bearings depends on the specific application requirements. Steel ball bearings are commonly used in applications that require high-speed rotation, such as electric motors, automotive components, and household appliances. Roller bearings find extensive use in heavy machinery, industrial gearboxes, construction equipment, and automotive applications where higher loads and radial forces are involved.

6. Size and Configurations: Steel ball bearings are available in a wide range of sizes and configurations, allowing for versatility in different applications. Roller bearings also come in various sizes and types, including cylindrical, tapered, and spherical roller bearings, catering to specific load and performance requirements.

7. Cost: Steel ball bearings are generally more cost-effective compared to roller bearings. The simpler design and manufacturing process of ball bearings contribute to their lower cost, making them a preferred choice in many applications where high load capacity is not a primary requirement.

In summary, steel ball bearings and roller bearings have different designs, load capacities, friction characteristics, stiffness, applications, and cost considerations. The choice between the two depends on factors such as load requirements, speed, rigidity, and the specific needs of the application in question.

China Standard Spare Parts Stainless Steel Bearing 6006 2RS Deep Groove Ball Bearing 1688   bearing blockChina Standard Spare Parts Stainless Steel Bearing 6006 2RS Deep Groove Ball Bearing 1688   bearing block
editor by CX 2024-03-29

Steel Ball Bearings

As one of the leading steel ball bearings manufacturers, suppliers, and exporters of mechanical products, We offer steel ball bearings and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of steel ball bearings.

Recent Posts